Explore Our Services
When industry leaders need reliable equipment and on-site support they can count on, they call CCS Energy Services. We have a long-standing, documented history of serving major operators including Chevron, Chord, ConocoPhillips, ExxonMobil, Shell, Marathon, Devon, Liberty Energy, and Halliburton — companies that share our commitment to safety and environmental responsibility.
Support You Can Count On
What sets us apart is simple: we stay. Our trained CCS professionals are present for every stage of every job — setup, execution, and teardown — working alongside your team to ensure nothing is overlooked. From start to finish, CCS is there.
Our Services
Secondary Containment
CCS focuses on providing the oilfield with superior secondary containments. Our cost-effective innovations combined with proven customer service from start to finish have made CCS the go-to source for containment in the Bakken.
CCS provides various containment options to safeguard against spills which helps to effectively maintain consistent operations on a larger scale. All of our containments are cleaned (and repaired if needed) after every job so they are like new for the next use.
All CCS berms are constructed by our professional staff with decades of experience. They are built with the most rigid, durable liner materials available on the market today. All materials used in the construction of CCS berms are UV, chemical, oil, and extreme heat and cold resistant. All of our products offer zero ground disturbance and have been tested and proven.
CCS berms come in a wide variety of styles to ensure your needs are met in the best and most direct way possible. However, custom orders are available for all CCS containments.
Click to view more information about each of our Containment products:
-
Our Foam-Wall Drive Over containments are the best solution to contain leaks or accidental spills in the oilfield. Designed for use under Fracking Equipment and tractor/trailers, our Foam-Wall Drive Over containments are constructed of the toughest material available on the market today, with a specialized coating applied to provide added durability with a proven non-slip surface. These containments have a perfected weight/surface area ratio which results in enough weight to stay in place in windy conditions, but yet not so heavy that health issues arise with the moving/adjusting of containment by hand. From sizes of 4' x 4' to 40' x 80', our large inventory is sure to have you covered.
Common uses are endless including frac equipment, diesel tank storage and disconnecting hoses
Walls made of durable 4", 5" or 6" foam
Drive in and out without worries
Very adaptable Non-slip surface
-
Quick-Latch containments are constructed as a 1-piece, quick set up unit to fill your containment needs under various oilfield equipment. Commonly used for tank farms on the drilling rigs, frac tanks, and fuel tanks, the Quick-Latch containment is set up by professional CCS staff in a matter of minutes. It’s 1-piece construction enables it to be set up or torn down quicker than any other containment in the industry. It is extremely durable and has proven itself time and time again. The Quick-Latch is offered in virtually every size large or small and is available with a wall height of either 13", 18" or 24". Heavy duty Track Mats are provided for added protection and traction.
Commonly used for tank farms, fuel tanks, and frac equipment
13", 18" or 24" walls
Extremely quick set up and tear-down time
Liner always reused and easily repaired as needed
Internal wall bracing system for a smaller footprint and reduced tripping hazards
Structurally engineered to resist extremely high wind
-
The Easy A containment consists of multiple "A" shaped pieces of galvanized steel. The sections are 2' tall x 4' wide, and are arranged to the desired size. A durable disposable liner is then placed inside and clamped down to the top of the "A" frame walls and corners which are firmly bolted together. This containment system provides reliable containment that is the most economical for any containment need. Commonly used for tank farms and fuel tanks on the drilling rigs.
Commonly used for tank farms and fuel tanks
2' walls
Constructed with connecting galvanized "A" frame panels
Resistant to high wind without anchoring or added weights
Liner replaced as needed (usually every well)
-
The Internal L containment system is CCS’ go-to product when you need secondary containment under large volumes with as small a footprint as possible. The Internal L is manufactured with our standard industry leading poly material. Designed with 3’ high walls, a heavy-duty galvanized top rail is threaded through the hem along the entire perimeter, corner pieces are inserted, and the containment walls are risen with our patented L braces that slide into place and support the integrity of the structure. The internal wall bracing system reduces nearly all trip hazards. The 3’ wall provides reassured EPA compliance for any job. Set up and tear-down time is extremely quick. Track mats are provided for added protection and traction.
Commonly used for tank farms and fuel tanks
3' walls
Quick set up and tear-down time
Liner always reused and easily repaired as needed
Internal wall bracing system for a smaller footprint and reduced tripping hazards
Structurally engineered to resist extremely high wind
-
Ground mats for underneath berm
Track mats for driving on top of berm
Tank Setting Pads for setting uprights inside berm
Safety crossover ladder
Hose bridges for running hoses in/out over berm walls
*Other standard containment accessories available.
Flow-Line Restraint System
CCS provides Rig-It flow-line restraint systems to operators across all of North America. CCS has the only staff with proper engineered documented training. Rig-It has been proven in the field to outperform all other restraint options, making it the preferred choice for customers who prioritize their staff’s safety and reliability.
Engineered specifically for high-pressure operations, Rig-It restraints are designed to perform in the event of a catastrophic flow-line failure, helping protect all personnel, equipment, and the location. When safety is truly a non‑negotiable, Rig-It is the flow-line restraint system operators can trust.
Emergency Shower Trailers
If your oil field project requires the use of acids or other hazardous chemicals, an emergency shower trailer and eyewash station is likely a site requirement. CCS shower trailers are designed to allow for a quick drench shower with a shower head and pump system allowing a minimum of 20 gallons of heated, city water per minute for 20 minutes.
Our fresh water tank is 425 gallons providing a more than adequate amount of water to decontaminate the subject at hand. Included in CCS shower trailers is both an overhead shower and an eye washing station for rapid response to accidents. All CCS shower trailers come with the winter package to be used all times of year in the extreme cold. They are run by Onan generators with 38-gallon diesel fuel tanks, and all are wired to run off of a generator or light plant on location if that is the preferred method. Trailers are built to meet or exceed all OSHA standards.
Hydrovac Services
Hydroexcavation trucks have recently become one of the go-to pieces of equipment in the oil and gas industry. CCS has a fleet of new, well maintained hydrovacs with smart, honest, hard working drivers and operators to go with them. Our Hydrovac services are cost effective and reduce downtime and maximize efficiency on worksites. You will not find better pricing or service than with CCS’ hydrovac division. Our hydrovac trucks are the perfect tool to clean up those accidental spills and messes.
We regularly do completion work and rig cleaning. Put our trucks to work cleaning your frac tanks, 400 BBL uprights, separators, and vessels. Trenching for pipelines is safest with a hydrovac, and has proven to be the least destructive. Our trucks are commonly out following the fracs, cleaning up location as the frac crew moves from one pad to the next. We will do a great job in the shortest time possible, and can get rid of your extra sand too. Give CCS a call for all your hydrovac and disposal needs, you will not be let down!
*CCS Hydrovac Dispatch - 406.480.7874
*In case of emergency call - 307.272.1096
LET'S WORK TOGETHERIf you're interested in working with us, complete the form with a few details about your project. We'll review your message and get back to you within 48 hours.